Update to ESP32-PoE

WS3/WS3-ESP32/ws3_defs.h

@@ -0,0 +1,62 @@
+// Definition used in this code
+
+#ifndef ws3_defs_h
+#define ws2_defs_h
+
+// Domoticz MQTT configuration by WiFiManager
+#define mqtt_port     1883
+
+// Max MQTT packet size
+#define MQTT_MAX_PACKET_SIZE 128
+
+// Defines
+#define OTAPASSWORD "123" // Password for OTA upload thru Arduino IDE
+
+// Debug
+#define DEBUG 1
+
+#ifdef DEBUG
+ #define debug(x)   Serial.print(x)
+ #define debugln(x) Serial.println(x)
+#else /* DEBUG */
+ #define debug(x)
+ #define debugln(x)
+#endif /* DEBUG */
+// Baud used to read see JP2
+#define WS3_BAUD  2400
+// Toggle support for PM2.5 sensor
+//#define SUPPORT_PM25_SENSOR 
+
+// Define the length of data
+#ifdef SUPPORT_PM25_SENSOR
+  // There is 88 bytes per packets
+  #define WS3_PKT_LEN 78
+  // And the checksum is the last 2 bytes 
+  #define WS3_CHK_LEN 2
+  #define CHK_SUM_DELINEATOR 75
+#else /* SUPPORT_PM25_SENSOR */
+  // There is 88 bytes per packets
+  #define WS3_PKT_LEN 78
+  // And the checksum is the last 2 bytes 
+  #define WS3_CHK_LEN 2
+  #define CHK_SUM_DELINEATOR 75
+#endif /* SUPPRT_PM25_SENSOR */
+
+// Seems the Metric format does not have a correct checksum
+// In this case we should not test the checksum, just see
+// if we have a correct dataline
+#define DONT_CHKSUM 1
+
+// Define ALTITUDE if you need to get pression corrected 
+// Set this to 0 if you don't care
+#define ALTITUDE 340    // Longwy is at 340m
+
+#ifdef ESP32
+ #define RXD2 16
+ #define TXD2 17
+#else  /* ESP32 */
+ #define RXD2 15
+ #define TXD2 16
+#endif /* ESP32 */
+
+#endif /* ws3_defs_h */