for real powermeter

libraries/ESP8266TimerInterrupt/examples/TimerInterruptTest/TimerInterruptTest.ino

@@ -0,0 +1,106 @@
+/****************************************************************************************************************************
+  TimerInterruptTest.ino
+  For ESP8266 boards
+  Written by Khoi Hoang
+
+  Built by Khoi Hoang https://github.com/khoih-prog/ESP8266TimerInterrupt
+  Licensed under MIT license
+
+  The ESP8266 timers are badly designed, using only 23-bit counter along with maximum 256 prescaler. They're only better than UNO / Mega.
+  The ESP8266 has two hardware timers, but timer0 has been used for WiFi and it's not advisable to use. Only timer1 is available.
+  The timer1's 23-bit counter terribly can count only up to 8,388,607. So the timer1 maximum interval is very short.
+  Using 256 prescaler, maximum timer1 interval is only 26.843542 seconds !!!
+
+  Now with these new 16 ISR-based timers, the maximum interval is practically unlimited (limited only by unsigned long miliseconds)
+  The accuracy is nearly perfect compared to software timers. The most important feature is they're ISR-based timers
+  Therefore, their executions are not blocked by bad-behaving functions / tasks.
+  This important feature is absolutely necessary for mission-critical tasks.
+*****************************************************************************************************************************/
+/* Notes:
+   Special design is necessary to share data between interrupt code and the rest of your program.
+   Variables usually need to be "volatile" types. Volatile tells the compiler to avoid optimizations that assume
+   variable can not spontaneously change. Because your function may change variables while your program is using them,
+   the compiler needs this hint. But volatile alone is often not enough.
+
+   When accessing shared variables, usually interrupts must be disabled. Even with volatile,
+   if the interrupt changes a multi-byte variable between a sequence of instructions, it can be read incorrectly.
+   If your data is multiple variables, such as an array and a count, usually interrupts need to be disabled
+   or the entire sequence of your code which accesses the data.
+*/
+
+#if !defined(ESP8266)
+  #error This code is designed to run on ESP8266 and ESP8266-based boards! Please check your Tools->Board setting.
+#endif
+
+// These define's must be placed at the beginning before #include "ESP8266TimerInterrupt.h"
+// _TIMERINTERRUPT_LOGLEVEL_ from 0 to 4
+// Don't define _TIMERINTERRUPT_LOGLEVEL_ > 0. Only for special ISR debugging only. Can hang the system.
+#define TIMER_INTERRUPT_DEBUG         1
+#define _TIMERINTERRUPT_LOGLEVEL_     1
+
+// Select a Timer Clock
+#define USING_TIM_DIV1                false           // for shortest and most accurate timer
+#define USING_TIM_DIV16               false           // for medium time and medium accurate timer
+#define USING_TIM_DIV256              true            // for longest timer but least accurate. Default
+
+#include "ESP8266TimerInterrupt.h"
+
+#define BUILTIN_LED     2       // Pin D4 mapped to pin GPIO2/TXD1 of ESP8266, NodeMCU and WeMoS, control on-board LED
+
+volatile bool statusLed = false;
+volatile uint32_t lastMillis = 0;
+
+#define TIMER_INTERVAL_MS       1000
+
+// Init ESP8266 timer 1
+ESP8266Timer ITimer;
+
+//=======================================================================
+void IRAM_ATTR TimerHandler()
+{
+  static bool started = false;
+
+  if (!started)
+  {
+    started = true;
+    pinMode(BUILTIN_LED, OUTPUT);
+  }
+
+  digitalWrite(BUILTIN_LED, statusLed);  //Toggle LED Pin
+  statusLed = !statusLed;
+
+#if (TIMER_INTERRUPT_DEBUG > 0)
+  Serial.println("Delta ms = " + String(millis() - lastMillis));
+  lastMillis = millis();
+#endif
+}
+//=======================================================================
+//                               Setup
+//=======================================================================
+void setup()
+{
+  Serial.begin(115200);
+  while (!Serial);
+
+  delay(300);
+
+  Serial.print(F("\nStarting TimerInterruptTest on ")); Serial.println(ARDUINO_BOARD);
+  Serial.println(ESP8266_TIMER_INTERRUPT_VERSION);
+  Serial.print(F("CPU Frequency = ")); Serial.print(F_CPU / 1000000); Serial.println(F(" MHz"));
+
+  // Interval in microsecs
+  if (ITimer.attachInterruptInterval(TIMER_INTERVAL_MS * 1000, TimerHandler))
+  {
+    lastMillis = millis();
+    Serial.print(F("Starting ITimer OK, millis() = ")); Serial.println(lastMillis);
+  }
+  else
+    Serial.println(F("Can't set ITimer correctly. Select another freq. or interval"));
+
+}
+//=======================================================================
+//                MAIN LOOP
+//=======================================================================
+void loop()
+{
+}