diff --git a/root/poudriere-build.sh b/root/poudriere-build.sh
new file mode 100755
index 0000000..2bba6f4
--- /dev/null
+++ b/root/poudriere-build.sh
@@ -0,0 +1,7 @@
+#!/bin/sh
+
+/usr/local/bin/poudriere bulk -f /usr/local/etc/poudriere.d/140x64.list -j 140x64 -p default
+/usr/local/bin/poudriere bulk -f /usr/local/etc/poudriere.d/130x64.list -j 130x64 -p default
+/usr/local/bin/poudriere bulk -f /usr/local/etc/poudriere.d/120x64.list -j 120x64 -p default
+
+#/usr/local/bin/poudriere bulk -f /usr/local/etc/poudriere.d/riscv64.list  -j 14riscv64 -p default
diff --git a/root/poudriere-cleanlogs.sh b/root/poudriere-cleanlogs.sh
new file mode 100755
index 0000000..04fb1c7
--- /dev/null
+++ b/root/poudriere-cleanlogs.sh
@@ -0,0 +1,5 @@
+#!/bin/sh
+
+/usr/local/bin/poudriere logclean -j 130x64 -y 15
+/usr/local/bin/poudriere logclean -j 140x64 -y 15
+/usr/local/bin/poudriere logclean -j 120x64 -y 15
diff --git a/root/poudriere-pkgclean.sh b/root/poudriere-pkgclean.sh
new file mode 100755
index 0000000..34ff8df
--- /dev/null
+++ b/root/poudriere-pkgclean.sh
@@ -0,0 +1,5 @@
+#!/bin/sh
+
+/usr/local/bin/poudriere pkgclean -f /usr/local/etc/poudriere.d/130x64.list -j 130x64 -p default -y
+/usr/local/bin/poudriere pkgclean -f /usr/local/etc/poudriere.d/140x64.list -j 140x64 -p default -y
+/usr/local/bin/poudriere pkgclean -f /usr/local/etc/poudriere.d/120x64.list -j 120x64 -p default -y
diff --git a/root/poudriere-portshaker.sh b/root/poudriere-portshaker.sh
new file mode 100755
index 0000000..2d8c6bb
--- /dev/null
+++ b/root/poudriere-portshaker.sh
@@ -0,0 +1,5 @@
+#!/bin/sh
+
+#/usr/local/bin/poudriere ports -u
+#/usr/local/bin/poudriere ports -l
+/usr/local/bin/portshaker -U && /usr/local/bin/portshaker -M
diff --git a/root/poudriere-portsnap.sh b/root/poudriere-portsnap.sh
new file mode 100755
index 0000000..744eac2
--- /dev/null
+++ b/root/poudriere-portsnap.sh
@@ -0,0 +1,4 @@
+#!/bin/sh
+
+/usr/local/bin/poudriere ports -u
+/usr/local/bin/poudriere ports -l
diff --git a/root/sensors.sh b/root/sensors.sh
new file mode 100755
index 0000000..0fb16df
--- /dev/null
+++ b/root/sensors.sh
@@ -0,0 +1,206 @@
+#! /bin/sh
+
+# Copyright (c) 2022 Slawomir Wojciech Wojtczak (vermaden)
+# Copyright (c) 2022 Trix Farrar
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that following conditions are met:
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in the
+#    documentation and/or other materials provided with the distribution.
+#
+# THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS 'AS IS' AND ANY
+# EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+# WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+# DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY
+# DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+# (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+# LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+# ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+# THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+#
+# ------------------------------
+# SIMPLE SENSORS INFORMATION
+# ------------------------------
+# vermaden [AT] interia [DOT] pl
+# https://vermaden.wordpress.com
+
+__usage() {
+  local NAME=${0##*/}
+  echo "USAGE:"
+  echo "  ${NAME} (without any arguments)"
+  echo
+  echo "NOTES:"
+  echo "  load these modules to get all the temperature data:"
+  echo "    - amdtemp.ko"
+  echo "    - coretemp.ko"
+  echo
+  echo "  install 'smartmontools' package for disks temperatures:"
+  echo "    # pkg install smartmontools"
+  echo
+  echo "  you need to execute as 'root' to get disks temperatures"
+  echo "    # ${NAME}"
+  echo "    % doas ${NAME}"
+  echo "    $ sudo ${NAME}"
+  echo
+  exit 1
+}
+
+if [ "${1}" = "-h"    -o \
+     "${1}" = "help"  -o \
+     "${1}" = "-help" -o \
+     "${1}" = "--help" ]
+then
+  __usage
+fi
+
+# GET sysctl(8) OUTPUT ONLY ONCE
+SYSCTL=$( sysctl dev hw.acpi 2> /dev/null )
+
+
+
+echo
+printf "%38s\n" 'BATTERY/AC/TIME/FAN/SPEED '
+printf "%38s\n" '------------------------------------ '
+
+# DISPLAY RELEVANT INFORMATION
+echo "${SYSCTL}" \
+  | grep -e dev.cpu.0.freq: \
+         -e hw.acpi.cpu.cx_lowest \
+         -e dev.cpu.0.cx_supported \
+         -e dev.cpu.0.cx_usage: \
+         -e hw.acpi.acline \
+         -e hw.acpi.battery.life \
+         -e hw.acpi.battery.time \
+         -e \.fan \
+  | sort -n \
+  | while read MIB VALUE1 VALUE2
+    do
+      printf "%38s %s" ${MIB} ${VALUE1}
+      printf " %s" ${VALUE2}
+      printf "\n"
+    done
+
+# CHECK IF power(8) IS RUNNING
+POWERD=0
+if pgrep -q powerd 1> /dev/null 2> /dev/null
+then
+  printf "%38s %s\n" "powerd(8):" "running"
+  POWERD=1
+fi
+
+# CHECK IF powerxx(8) IS RUNNING
+POWERDXX=0
+if pgrep -q -x -S "powerd\+\+" 1> /dev/null 2> /dev/null
+then
+  printf "%38s %s\n" "powerdxx(8):" "running"
+  POWERDXX=1
+fi
+
+# DISPLAY powerd(8)/powerdxx(8) STATUS
+if [ ${POWERD} -eq 0 -a ${POWERDXX} -eq 0 ]
+then
+  printf "%38s %s\n" "powerd(8)/powerdxx(8):" "disabled"
+  unset POWERD
+  unset POWERDXX
+fi
+
+
+
+echo
+printf "%38s\n" 'SYSTEM/TEMPERATURES '
+printf "%38s\n" '------------------------------------ '
+
+# DISPLAY RELEVANT INFORMATION
+echo "${SYSCTL}" \
+  | grep -e temperature \
+  | grep -v 'critical temperature detected' \
+  | sort -n -t . -k 2 \
+  | while read MIB VALUE
+    do
+      case ${MIB} in
+        # USE 3 FIELDS FOR dev.cpu.* MIBS
+        (dev.cpu.*)
+          PREFIX=$( echo ${MIB} | awk -F '.' '{print $1 "\\." $2 "\\." $3 "\\."}' )
+          MAX=$( echo "${SYSCTL}" \
+                   | grep "${PREFIX}" \
+                   | grep coretemp.tjmax \
+                   | awk '{print $NF}' )
+          printf "%38s %s (max: %s)\n" ${MIB} ${VALUE} ${MAX}
+          unset PREFIX
+          unset MAX
+          ;;
+        # USE 4 FIELDS FOR hw.acpi.thermal.* MIBS
+        (hw.acpi.thermal.*)
+          PREFIX=$( echo ${MIB} | awk -F '.' '{print $1 "\\." $2 "\\." $3 "\\." $4 "\\."}' )
+          MAX=$( echo "${SYSCTL}" \
+                   | grep "${PREFIX}" \
+                   | grep _CRT: \
+                   | awk '{print $NF}' )
+          printf "%38s %s (max: %s)\n" ${MIB} ${VALUE} ${MAX}
+          unset PREFIX
+          unset MAX
+          ;;
+        # JUST DISPLAY WITHOUT PARSING FOR OTHER MIBS
+        (*)
+          printf "%38s %s\n" ${MIB} ${VALUE}
+          ;;
+      esac
+    done
+
+
+
+echo
+printf "%38s\n" 'DISKS/TEMPERATURES '
+printf "%38s\n" '------------------------------------ '
+
+# WE NEED root PERMISSIONS FOR smartctl(8) COMMAND
+if [ $( whoami ) != "root" ]
+then
+  echo "   Run '${0##*/}' as 'root' to display disks temperatures."
+  echo
+  exit 0
+fi
+
+# CHECK IF smartctl() IS AVAILABLE
+if ! which smartctl 1> /dev/null 2> /dev/null
+then
+  echo "   Install 'sysutils/smartmontools' package to display disks temperatures."
+  echo
+  exit 0
+fi
+
+# DISPLAY TEMPERATURE FOR EACH DISK
+for I in $( sysctl -n kern.disks | tr ' ' '\n' | sort -n )
+do
+  case ${I} in
+    # IGNORE cd(4) DEVICES
+    (cd*)
+      continue
+      ;;
+    # THE nvd(4) AND nvme(4) DEVICES NEED SPECIAL HANDLING
+    (nvd*)
+      I=$( echo ${I} | sed -e 's/nvd/nvme/g' )
+      smartctl -a /dev/${I} \
+        | grep -e Temperature: \
+        | sed -E 's|\(.*\)||g' \
+        | awk -v DISK=${I} \
+            '{MIB="smart." DISK "." tolower($1) ":"; printf("%38s %s.0C\n", MIB, $(NF-1))}'
+      ;;
+    # SATA/ATA/SCSI/USB DISKS
+    (*)
+      smartctl -a /dev/${I} \
+        | grep -e Temperature_ \
+        | sed -E 's|\(.*\)||g' \
+        | awk -v DISK=${I} \
+            '{MIB="smart." DISK "." tolower($2) ":"; printf("%38s %s.0C\n", MIB, $NF)}'
+      ;;
+  esac
+done
+echo
+
+echo '1' 2> /dev/null >> ~/scripts/stats/${0##*/}